74
Frequency (Color Correction) A
You can set how often the color correction
(Color Calibration and Auto Registration)
occurs. The default setting is Normal. The
color correction process consumes some
amount of the toner.
a Press Menu, 4, 9.
b Press a or b to choose Normal, Low or
Off.
Press OK.
c Press Stop/Exit.
Checking the Page Counters A
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
a Press Menu, 8, 2.
82.Page Counter
a Total :XXXXXX
Fax/List :XXXXXX
b Copy :XXXXXX
Select ab or OK
b Press a or b to see Total, Fax/List,
Copy or Print.
c Press Stop/Exit.
Checking the remaining life of
parts A
You can see the machine’s parts life on the
LCD.
a Press Menu, 8, 3.
83.Parts Life
1.Drum
2.Belt Unit
3.Fuser
Select ab or OK
b Press a or b to choose 1.Drum,
2.Belt Unit , 3.Fuser , 4.Laser,
5.PF Kit MP , 6.PF Kit 1 or
7.PF Kit 2 .
Press OK.
c Press Stop/Exit.
The life check will be accurate only if you
have reset the part counter when you
installed a new part. It will not be accurate
if that part’s life counter was reset during
the life of the used part.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
