EasyManuals Logo

Brother MFC-J265W User Manual

Brother MFC-J265W
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #175 background imageLoading...
Page #175 background image
Receiving a fax
17
4
Remote Retrieval 4
You can call your machine from any
touch-tone telephone or fax machine and
then use the remote access code and remote
commands to retrieve fax messages.
Setting a Remote Access
Code 4
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you can use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is the inactive code (--- ).
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remote Access.
d Enter a three-digit code using numbers
0-9, l, or #.
Press OK. (The preset “ ” cannot be
changed.)
Note
Do not use the same code as your
Remote Activation Code (l 51 (l 9 1 for
New Zealand)) or Remote Deactivation
Code (#51 (#9 1 for New Zealand)).
(See Operation from external and
extension telephones in chapter 6 in the
Basic User’s Guide.)
e Press Stop/Exit.
Note
You can change your code at any time by
entering a new one. If you want to make
your code inactive, press Clear in step d
to restore the inactive setting (--- ) and
press OK.
Using your Remote Access
Code 4
a Dial your fax number from a touch-tone
telephone or another fax machine.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once.
c The machine signals if it has received
messages:
1 long beep — Fax messages
No beeps — No messages
d When the machine gives two short
beeps, enter a command.
The machine will hang up if you wait
longer than 30 seconds to enter a
command.
The machine will beep three times if you
enter an invalid command.
e Press 90 to stop Remote Access when
you have finished.
f Hang up.
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait for about 100 seconds after
it starts ringing, and then enter the remote
access code within 30 seconds. This
function may not be available in some
countries e.g. Australia.

Table of Contents

Other manuals for Brother MFC-J265W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J265W and is the answer not in the manual?

Brother MFC-J265W Specifications

General IconGeneral
Duplex printingNo
Print technologyInkjet
Maximum resolution1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Scan toE-mail, File, Image
Grayscale levels256
Maximum scan areaA4 (210 x 297) mm
Image formats supportedBMP, JPG, PNG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution1200 x 2400 DPI
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
N-in-1 copy function (N=)2, 4
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory170 pages
Modem speed14.4 Kbit/s
Fax coding methodsMH, MMR (Fax coding method), MR
Error Correction Mode (ECM)Yes
Total input capacity100 sheets
Total output capacity50 sheets
Total number of input trays1
DisplayLCD
Product colorBlack
Display diagonal1.9 \
Market positioningHome & office
Internal memory32 MB
Sound pressure level (printing)50 dB
Maximum print size210 x 297 mm
Paper tray media typesEnvelopes, Glossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Photo paper sizes (imperial)4x6, 10x15 \
Maximum ISO A-series paper sizeA4
Wi-Fi standards802.11b, 802.11g
Security algorithms128-bit WEP, 64-bit WEP, WPA-TKIP, WPA2-PSK
Mobile printing technologies-
Standard interfacesUSB 2.0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (off)0.65 W
Power consumption (standby)4 W
Power consumption (average operating)19.5 W
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Maximum duty cycle- pages per month
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Server operating systems supportedWindows Server 2003, Windows Server 2008
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Sustainability certificatesENERGY STAR
Package depth226 mm
Package width464.8 mm
Package height459.7 mm
Package weight8890 g
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth368 mm
Width390 mm
Height150 mm

Related product manuals