EasyManuals Logo

Brother MFC-J265W User Manual

Brother MFC-J265W
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #182 background imageLoading...
Page #182 background image
Chapter 5
24
g Do one of the following:
Enter a second fax or telephone
number (up to 20 digits).
Press OK.
If you do not want to store a second
number, press OK.
h Press a or b to choose Complete.
Press OK.
i Press Stop/Exit.
Setting up groups for
broadcasting 5
Groups, which can be stored in a Speed Dial
location, allow you to send the same fax
message to many fax numbers by pressing
only (Speed Dial), Search, OK,
the two-digit location and Mono Start.
First, you'll need to store each fax number in
a Speed Dial location. Then you can include
them as numbers in the Group. Each Group
uses up a Speed Dial location. You can have
up to six Groups, or you can assign up to
198 numbers in a large Group.
(See Broadcasting (Monochrome only)
on page 8 and Storing Speed Dial numbers in
chapter 7 in the Basic User’s Guide.)
a Press (Speed Dial).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d Press a or b to choose the two-digit
Speed Dial location you want to add to
the Group.
Press OK.
e Press a or b to choose Add Number.
Press OK.
f To add numbers to the group, press
a or b to choose Alphabetic Order
or Numeric Order and OK. Press
a or b to select a number and OK.
g Do one of the following:
To add another number to the group,
repeat steps e to f.
If you are finished adding numbers to
the group, press a or b to choose
Complete.
Press OK.
h Do one of the following:
To store another Group for
broadcasting, repeat steps c to g.
To finish storing Groups for
broadcasting, press Stop/Exit.
Note
You can print a list of all the Speed Dial
numbers. Group numbers will be marked
in the GROUP column. (See Reports
on page 27.)
Changing a Group name 5
a Press (Speed Dial).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group name
you want to change.
Press OK.
d Press a or b to choose
Change Group Name.
Press OK.

Table of Contents

Other manuals for Brother MFC-J265W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J265W and is the answer not in the manual?

Brother MFC-J265W Specifications

General IconGeneral
Duplex printingNo
Print technologyInkjet
Maximum resolution1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Scan toE-mail, File, Image
Grayscale levels256
Maximum scan areaA4 (210 x 297) mm
Image formats supportedBMP, JPG, PNG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution1200 x 2400 DPI
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
N-in-1 copy function (N=)2, 4
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory170 pages
Modem speed14.4 Kbit/s
Fax coding methodsMH, MMR (Fax coding method), MR
Error Correction Mode (ECM)Yes
Total input capacity100 sheets
Total output capacity50 sheets
Total number of input trays1
DisplayLCD
Product colorBlack
Display diagonal1.9 \
Market positioningHome & office
Internal memory32 MB
Sound pressure level (printing)50 dB
Maximum print size210 x 297 mm
Paper tray media typesEnvelopes, Glossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Photo paper sizes (imperial)4x6, 10x15 \
Maximum ISO A-series paper sizeA4
Wi-Fi standards802.11b, 802.11g
Security algorithms128-bit WEP, 64-bit WEP, WPA-TKIP, WPA2-PSK
Mobile printing technologies-
Standard interfacesUSB 2.0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (off)0.65 W
Power consumption (standby)4 W
Power consumption (average operating)19.5 W
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Maximum duty cycle- pages per month
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Server operating systems supportedWindows Server 2003, Windows Server 2008
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Sustainability certificatesENERGY STAR
Package depth226 mm
Package width464.8 mm
Package height459.7 mm
Package weight8890 g
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth368 mm
Width390 mm
Height150 mm

Related product manuals