Brother MFC-J280W User Manual

Configuring your machine for a wireless network
12
3
3 Click Install MFL-Pro Suite and click Yes if you accept the license agreements. Follow the on-
screen instructions.
c Choose Wireless Network Connection, and then click Next.
d Choose Change the Firewall port settings to enable network connection and continue with the
installation. (Recommended) and click Next.
e Choose Use your computer or the control panel directly. and click Next.
f Choose Temporarily use a USB cable (Recommended) and click Next.
g Follow the on-screen instructions to configure the wireless settings, and install drivers and software.
Note
When the Available Wireless Networks screen appears, if your access point is set to not broadcast the
SSID you can manually add it by clicking the Advanced button. Follow the on-screen instructions for
entering the Name (SSID).
You have completed the wireless network setup, and driver and software installation.
For Macintosh users 3
IMPORTANT
• The following instructions will install your Brother machine in a network environment using the Brother
installer application found on the CD-ROM we have provided with the machine.
• If you have previously configured the wireless settings of the machine, you must reset the LAN settings
before you can configure the wireless settings again.
To reset the LAN settings, see Restoring the network settings to factory default uu page 41.
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print please re-enable your firewall.
• You need to temporarily use a USB cable (not included) during configuration.
• You must know your wireless network settings before you proceed with this installation.
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
• If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.

Brother MFC-J280W Specifications

General

Dimensions (WxDxH)	404 x 378 x 160 mm
All-in-one functions	Copy, Fax, Print, Scan
Connectivity technology	Wired & Wireless
Color all-in-one functions	copy, fax, print, scan
Duplex printing	No
Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	33 ppm
Print speed (color, normal quality, A4/US Letter)	26 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	2500 pages per month
Number of print cartridges	4
Copier resize	25 - 400 %
Maximum copy resolution	- DPI
N-in-1 copy function (N=)	2, 4
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	20 cpm
Scan to	E-mail, File, Image, OCR
Scanner type	Flatbed scanner
Input color depth	36 bit
Maximum scan area	A4 / Letter (216 x 297) mm
Image formats supported	BMP, JPG, PCX, PNG, TIF
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	1200 x 2400 DPI
Faxing	Color faxing
Fax memory	170 pages
Modem speed	14.4 Kbit/s
Auto reduction	Yes
Fax transmission speed	7 sec/page
Total input capacity	100 sheets
Total output capacity	50 sheets
Envelopes sizes	10, DL
Maximum print size	216 x 356 mm
Paper tray media types	Envelopes, Glossy paper, Photo paper, Plain paper
Non-ISO print media sizes	Executive
ISO A-series sizes (A0...A9)	A4
Photo paper sizes (imperial)	4x6, 5x7, 5x8, 8x10 \
Display	LCD
Display diagonal	1.9 \
Market positioning	Home & office
Standard interfaces	USB 2.0, Wireless LAN
USB 2.0 ports quantity	1
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Sound pressure level (copying)	50 dB
AC input voltage	100 - 120 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	4 W
Power consumption (average operating)	29 W
Package weight	10300 g
Operating temperature (T-T)	50 - 95 °F
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR