Brother MFC-J280W User Manual

Control panel setup
35
4
IP Address 4
This field displays the current IP address of the machine. If you have chosen a BOOT Method of Static,
enter the IP address that you wish to assign to the machine (check with your network administrator for a
suitable IP address to use). If you have chosen a method other than Static, the machine will attempt to
determine its IP address using the DHCP or BOOTP protocols. The default IP address of your machine will
probably be incompatible with the IP address numbering scheme of your network. We recommend that you
contact your network administrator for a suitable IP address for the network the unit will be connected on.
Subnet Mask 4
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
Gateway 4
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
Node Name 4
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will
be the name that is registered by the WINS server on your network. Brother recommends the name
BRNxxxxxxxxxxxx for a wired network or BRWxxxxxxxxxxxx for a wireless network (where xxxxxxxxxxxx is
your machine’s Ethernet address) (up to 15 characters).
WINS Config 4
This selection controls how the machine obtains the IP address of the WINS server.
Auto 4
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto or DHCP for this feature to work.
Static
4
Uses a specified IP address for the primary and secondary WINS servers.
WINS Server 4
Primary WINS Server IP Address 4
This field specifies the IP address of the primary WINS (Windows
®
Internet Name Service) server. If set to a
non-zero value, the machine will contact this server to register its name with the Windows
®
Internet Name
Service.

Brother MFC-J280W Specifications

General

Dimensions (WxDxH)	404 x 378 x 160 mm
All-in-one functions	Copy, Fax, Print, Scan
Connectivity technology	Wired & Wireless
Color all-in-one functions	copy, fax, print, scan
Duplex printing	No
Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	33 ppm
Print speed (color, normal quality, A4/US Letter)	26 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	2500 pages per month
Number of print cartridges	4
Copier resize	25 - 400 %
Maximum copy resolution	- DPI
N-in-1 copy function (N=)	2, 4
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	20 cpm
Scan to	E-mail, File, Image, OCR
Scanner type	Flatbed scanner
Input color depth	36 bit
Maximum scan area	A4 / Letter (216 x 297) mm
Image formats supported	BMP, JPG, PCX, PNG, TIF
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	1200 x 2400 DPI
Faxing	Color faxing
Fax memory	170 pages
Modem speed	14.4 Kbit/s
Auto reduction	Yes
Fax transmission speed	7 sec/page
Total input capacity	100 sheets
Total output capacity	50 sheets
Envelopes sizes	10, DL
Maximum print size	216 x 356 mm
Paper tray media types	Envelopes, Glossy paper, Photo paper, Plain paper
Non-ISO print media sizes	Executive
ISO A-series sizes (A0...A9)	A4
Photo paper sizes (imperial)	4x6, 5x7, 5x8, 8x10 \
Display	LCD
Display diagonal	1.9 \
Market positioning	Home & office
Standard interfaces	USB 2.0, Wireless LAN
USB 2.0 ports quantity	1
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Sound pressure level (copying)	50 dB
AC input voltage	100 - 120 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	4 W
Power consumption (average operating)	29 W
Package weight	10300 g
Operating temperature (T-T)	50 - 95 °F
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR