Brother MFC-J280W - Page 52

Control panel setup
48
4
For MFC-J425W/J430W/J432W/J435W 4
Main menu Submenu Menu Selections Options
Network TCP/IP BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
1
Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
1
Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
Node Name BRWXXXXXXXXXXXX= (your machine’s Ethernet
address)
(up to 15 characters)
WINS Config Auto/Static
WINS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
DNS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
APIPA On/Off
Setup Wizard — (Choose SSID from list or manually add SSID)
WPS/AOSS —
WPS w/PIN Code —
WLAN Status Status (Examples)
Active(11b)/Active(11g)/Active(11n)/
AOSS Active/Connection Fail
Signal Signal:Strong/Signal:Medium/Signal:Weak/
Signal:None
SSID (Shows SSID with up to 32 digits)
Comm. Mode (Examples)
Ad-hoc/Infrastructure
MAC Address
WLAN Enable On/Off
Network Reset