Home > Network > Advanced Network Features > Fax Using the Internet (I-Fax) > Configure Your Brother
Machine for Email or I-Fax
Configure Your Brother Machine for Email or I-Fax
Before using I-Fax, configure your Brother machine to communicate with your network and mail server. You
can configure these items using the machine's control panel, Web Based Management, Remote setup, or
BRAdmin Professional 3. We recommend using Web Based Management to configure the optional items.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click
.
4. Click the Network tab.
5. Click the Protocol menu in the left navigation bar.
6. In the POP3/IMAP4/SMTP field, click Advanced Settings and configure the following settings:
• Send E-mail Settings(SMTP)
- Port
- Server Authentication Method
- SMTP-AUTH Account Name
- SMTP-AUTH Account Password
• Receive E-mail Settings(POP3/IMAP4)
- Protocol
- Mailbox Name
- Mailbox Password
If you are unsure of any of these items, contact your system administrator.
7. When finished, click Submit.
The Test Send/Receive E-mail Configuration dialog box appears.
8. Follow the instructions in the dialog box to test the current settings.
Related Information
• Fax Using the Internet (I-Fax)
• Initial Setup for Email or I-Fax
• Send an I-Fax
• Receive an I-Fax Automatically
• Poll the Server Manually
• I-Fax Options
444
To Next Page
Loading...
Need help?
General
