Home > Network > Advanced Network Features > Fax Using the Internet (I-Fax) > Configure Your Brother
Machine for Email or I-Fax > Initial Setup for Email or I-Fax
Initial Setup for Email or I-Fax
Before sending your I-Fax, use Web Based Management to configure sending and receiving options, if
needed.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click
.
4. Click the Fax tab.
5. Click I-Fax in the left navigation bar.
6. Click E-mail Send and configure the following settings:
• E-mail Subject
• Size Limit
• Request Delivery Notification (Send)
7. When finished, click Submit.
Related Information
• Configure Your Brother Machine for Email or I-Fax
• Forward Received Email and Fax Messages
445
To Next Page
Loading...
Need help?
General
