Home > Network > Advanced Network Features > Fax Using the Internet (I-Fax) > I-Fax Options > Set Up
Relay Broadcast on Your Brother Machine
Set Up Relay Broadcast on Your Brother Machine
A Relay Broadcast is when your Brother machine receives a message over the Internet and then relays it to
another fax machine using conventional telephone lines. If you must fax a document over a long distance or
abroad, use the "relay broadcast" function to save the communication fee.
1. Internet-available fax machine
2. The Internet
3. Your Brother Machine
4. Telephone line
5. Fax machine
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click
.
4. Click the Fax tab.
5. Click I-Fax in the left navigation bar.
6. Click Relay Function and configure the following settings:
• Relay Broadcast Function
Set the Relay Broadcast Function to On.
• Relay Domain
454
To Next Page
Loading...
Need help?
General
