Chapter 2
16
l Close the output paper tray cover and
slowly push the paper tray into the
machine.
m Pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
If you are finished using Ledger, Legal or
A3 size paper and want to use a smaller
paper size, take the paper out of the tray.
Then shorten the tray by pressing the
universal guide release button (1). Adjust
the paper length guide (2) to fit the paper
size you are going to use. Then put the
smaller paper into the tray.
1
2
To Next Page
Loading...
