Brother MFC-J6520DW

Outline, Scan, and Copy or Cut
35
4
f Swipe left or right, or press d or c to display Apps.
Press Apps.
g Press Outline&Scan.
h If information regarding Outline&Scan is displayed, read the information and press OK.
i You will be asked if you want to display this information again in the future.
Press Yes or No.
j Do one of the following:
 To save images to a cloud, press Save to Cloud and go to step k.
 To save images to media, press Save to Media Card and go to step n.
k Swipe left or right, or press d or c to display the service you want.
Press the service name.
l Swipe up or down, or press a or b to display your account name, and then press it.
m If the PIN entry screen is displayed, enter the four-digit PIN and press OK.
n If the LCD prompts you to specify scan size, select the scan size of the document you are scanning.
o Press OK.
If you placed the document in the ADF, the machine starts scanning.
If you are using the scanner glass, go to step p.
p When Next page? is displayed, do one of the following:
 If there are no more pages to scan, press No. Go to step r.
 To scan more pages, press Yes and go to step q.
q Place the next page on the scanner glass.
Press OK.
The machine starts scanning the page. Repeat steps p and q for each additional page.
r The machine uploads the image. When it is finished, press OK.
s Press .
For MFC-J6520DW/J6720DW 4
a Using a red pen, outline the areas of the document that you want to scan.
b Load your document.
c Press d or c to display Web.
Press Web.
d If information regarding the Internet connection is displayed on the machine’s LCD, read the information
and press OK.