EasyManuals Logo

Brother MFC-J6710DW Basic User's Guide

Brother MFC-J6710DW
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Troubleshooting
99
B
Dial Tone detection B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the factory No Detection setting.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose Dial Tone.
d Press d or c to choose Detection or
No Detection.
Press OK.
e Press Stop/Exit.
Telephone line
interference / VoIP B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, you can change the
compatibility setting, which reduces the
modem speed to minimise errors.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose
Compatibility.
d Press d or c to choose High, Normal or
Basic(for VoIP).
Basic(for VoIP) cuts the
modem speed to 9,600 bps and
turns off colour fax receiving and
ECM, except for colour fax sending.
Unless interference is a recurring
problem on your telephone line, you
may prefer to use it only when
needed.
To improve compatibility with most
VoIP services, Brother recommends
changing the compatibility setting to
Basic(for VoIP).
Normal sets the modem speed at
14,400 bps.
High increases the modem speed to
33,600 bps. (factory setting)
Press OK.
e Press Stop/Exit.
Note
VoIP (Voice over IP) is a type of phone
system that uses an internet connection,
rather than a traditional phone line.
Brother does not recommend the use of a
VoIP line. VoIP limitations in general can
cause some functions of the fax machine
not to work correctly.

Table of Contents

Other manuals for Brother MFC-J6710DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J6710DW and is the answer not in the manual?

Brother MFC-J6710DW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Economical printingYes
Duplex printing modeAuto
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Digital senderNo
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle- pages per month
Number of print cartridges4
Scan toE-mail, E-mail Server, File, FTP, Image, OCR, USB
Scanner typeFlatbed & ADF scanner
Grayscale levels256
Input color depth48 bit
Maximum scan areaA3 (297 x 420) mm
Output color depth24 bit
Image formats supportedBMP, JPG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution2400 x 2400 DPI
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory400 pages
Modem speed33.6 Kbit/s
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Fax resolution (black)203 x 392 DPI
Fax speed dialing (max numbers)100
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity50 sheets
Maximum input capacity500 sheets
Total number of input trays2
Auto document feeder (ADF) input capacity35 sheets
DisplayLCD
Product colorBlack
Display diagonal3.3 \
Market positioningBusiness
Processor familyRISC
Compatible memory cardsMemory Stick (MS), MS PRO, MS PRO Duo, SD, SDHC
Sound pressure level (printing)50 dB
Photo paper sizes9x13, 10x15, 13x18, 20x25 cm
Custom media width148 - 297 mm
Maximum print size297 x 432 mm
Custom media length148 - 431.8 mm
Paper tray media typesBond paper, Glossy paper, Photo paper, Plain paper, Recycled paper, Transparencies
Paper tray media weight64 - 220 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A3, A4, A5, A6
Photo paper sizes (imperial)4x6, 5x7, 5x8, 8x10, 10x15 \
Borderless printing media sizesA3, A4, A6, B4
Maximum ISO A-series paper sizeA3
Auto Document Feeder (ADF) media weight64 - 90 g/m²
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms128-bit WEP, 64-bit WEP, SSID, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK
Mobile printing technologies-
Standard interfacesEthernet, USB 2.0, Wireless LAN
USB 2.0 ports quantity1
Scan speed3.49 sec/page
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionscopy, fax, print, scan
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)7.5 W
Power consumption (PowerSave)4 W
Power consumption (average operating)26 W
Package weight25.000 g
Sustainability certificatesENERGY STAR
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Server operating systems supportedWindows Server 2003, Windows Server 2003 x64, Windows Server 2008
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Bundled softwareBrother MFL-Pro Suite\\r Brother ControlCentre4 (Win)\\r Nuance® Paperport® 12 SE + OCR (Win)\\r Reallusion® FaceFilter Studio (Win8)\\r Brother ControlCentre2 (Mac)\\r NewSoft® Presto!® PageManager9 (Mac)
Weight and Dimensions IconWeight and Dimensions
Depth489 mm
Width540 mm
Height331 mm

Related product manuals