Troubleshooting
91
B
Troubleshooting B
If you think there is a problem with your machine, check the chart below and follow the
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com/
.
If you are having difficulty with your machine B
Printing
Difficulty Suggestions
No printout. Check the interface cable or wireless connection on both the machine and your
computer. (See the Quick Setup Guide.)
Check that the machine is plugged in and that the On/Off key is on.
One or more ink cartridges have reached the end of their life.
(See Replacing the ink cartridges on page 69.)
Check to see if the LCD is showing an error message.
(See Error and Maintenance messages on page 75.)
If the LCD shows Cannot Print and Replace Ink, see Replacing the ink
cartridges on page 69.
Check that the correct printer driver has been installed and chosen.
Make sure that the machine is online. Click Start and then Printers and Faxes.
Brother MFC-XXXXX (where XXXXX is your model name), and make sure that
Use Printer Offline is unchecked.
Poor print quality. Check the print quality. (See Checking the print quality on page 73.)
Make sure that the Media Type setting in the printer driver or the Paper Type
setting in the machine’s menu matches the type of paper you are using. (See
Printing for Windows
®
or Printing and Faxing for Macintosh in the Software User’s
Guide and Paper Type on page 22.)
Make sure that your ink cartridges are fresh. The following may cause ink to clog:
The expiration date written on the cartridge package has passed. (Brother
Original cartridges stay usable for up to two years if kept in their original
packaging.)
The ink cartridge has been in your machine for over six months.
The ink cartridge may not have been stored correctly before use.
Make sure you are using Brother Original Innobella™ ink. Brother does not
recommend the use of cartridges other than Brother Original cartridges or the
refilling of used cartridges with ink from other sources.
Try using the recommended types of paper.
(See Acceptable paper and other print media on page 25.)
The recommended environment for your machine is between 20 C to 33 C.
White horizontal lines appear in text
or graphics.
Clean the print head. (See Cleaning the print head on page 73.)
Make sure you are using Brother Original Innobella™ ink.
Try using the recommended types of paper.
(See Acceptable paper and other print media on page 25.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
