EasyManuals Logo

Brother MFC-J995DW User Manual

Brother MFC-J995DW
720 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #296 background imageLoading...
Page #296 background image
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device)
External TAD (Telephone Answering Device)
You can connect an external Telephone Answering Device (TAD) to the same line as your machine. When the
TAD answers a call, your machine will “listen” for the CNG (fax calling) tones sent by a sending fax machine. If it
hears them it will take over the call and receive the fax. If it does not hear them, it will let your TAD take a voice
message and the LCD will show [Telephone].
The external TAD must answer within four rings (we recommend setting it to two rings). This is because your
machine cannot hear the CNG tones until the external TAD has picked up the call. The sending machine will
send CNG tones for only eight to ten seconds longer. We do not recommend using the toll saver feature on your
external TAD if it needs more than four rings to activate it.
Unless you are using Distinctive Ring, the TAD must be connected to the EXT. jack of the machine.
If you subscribe to your telephone company’s Distinctive Ring service:
You may connect an external TAD to a separate wall jack only if you subscribe to your telephone company’s
Distinctive Ring service, have registered the distinctive ring pattern on your machine, and use that number as
a fax number. The recommended setting is at least four rings on the external TAD when you have the
telephone company’s Distinctive Ring service. You cannot use the Toll Saver setting.
If You Do Not Subscribe to the Distinctive Ring Service:
You must plug your TAD into the EXT. jack of your machine. If your TAD is plugged into a wall jack, both your
machine and the TAD will try to control the telephone line. (See the illustration.)
1
1
2 Protective Cap
1 TAD
2
IMPORTANT
DO NOT connect a TAD elsewhere on the same telephone line.
If you have problems receiving faxes, reduce the Ring Delay setting on your external TAD.
Related Information
Telephone Services and External Devices
Connect an External TAD
Record an Outgoing Message (OGM) on the External TAD
Multi-line Connections (PBX)
289

Table of Contents

Other manuals for Brother MFC-J995DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J995DW and is the answer not in the manual?

Brother MFC-J995DW Specifications

General IconGeneral
Typeall in one, fax, printer, scanner
Colorwhite
Touch Screenyes
Display Size2.7 inches
Tray Capacity150
Automatic Document Feeder Capacity20 sheets
Paper Sizelegal
Paper Handlinginput tray-150 sheets, photo tray-20 sheets, adf-20 sheets, bypass tray-1 sheet
Printing Methodcolor
Color Print Speed10 pages per minute
Mono Print Speed12 pages per minute
First Page Print Time8 seconds
Print Resolution Monoup to 6000 x 1200
Print Resolution Colorup to 6000 x 1200
Media Typesletter-size glossy inkjet paper; 4" x 6" glossy photo paper; letter-size multi-purpose paper
Two-Sided Printingyes
Maximum Number of Pages Per Monthup to 5, 000
Reduction and Enlargementyes
Photo Printingyes
Scanner Typeflatbed
Scan Resolutionup to 2400 x 1200
Copier Resolution Monoup to 1200 x 1200
Copier Resolution Colorup to 1200 x 1200
Fax Functionyes
Cartridgeslc3035bk, lc3035c, lc3035m, lc3035y, lc3033bk, lc3033c, lc3033m, lc3033y
Number Of Cartridges4
Number of Ink Tanks0
Internal Memoryyes
Memory Cardno
Networkwired, wireless
Connectivityapple airprint, brother iprint&scan, ethernet, mopria print service, nfc, usb 2.0, wi-fi direct
OS Compatibilitywindows: 10, 8.1, 8, 7; windows server 2008, 2008 r2; mac: os x v10.11.6, 10.12.x, 10.13.x
Mobile Devices Connectionyes
Weight and Dimensions IconWeight and Dimensions
Depth13.4 inches
Height7.7 inches
Width17.1 inches
Net Weight19.2 pounds

Related product manuals