EasyManuals Logo

Brother mfc-t800 User Manual

Brother mfc-t800
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Troubleshooting
85
B
Printing Received Faxes
Difficulty Suggestions
Condensed print
Horizontal streaks
Top and bottom sentences are
cut off
Missing lines
This is usually caused by a poor telephone connection. Make a copy; if your copy
looks good, you probably had a bad connection, with static or interference on the
telephone line. Ask the other party to send the fax again.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Left and right margins are cut off or
a single page is printed on two
pages.
If the received faxes are divided and printed on two pages or if you get an extra
blank page, your Paper Size setting may not be correct for the paper you are
using.
(See Paper Size on page 15.)
Turn on Auto Reduction. (See Advanced User’s Guide: Printing a reduced
incoming fax.)
Telephone Line or Connections
Difficulty Suggestions
Dialing does not work.
(No dial tone)
Check all line cord connections. Make sure the telephone line cord is plugged into
the telephone wall jack and the LINE jack inside the machine.
Change the Tone/Pulse setting. (See Quick Setup Guide.)
Send a manual fax by pressing Teléfono (Hook) and dialing the number. Wait to
hear fax-receiving tones before pressing Inicio Negro (Black Start).
If there is no dial tone, connect a known-working telephone and telephone line
cord to the jack. Then lift the external telephone's handset and listen for a dial tone.
If there is still no dial tone, ask your telephone company to check the line and/or
wall jack.
The machine does not answer
when called.
Make sure the machine is in the correct Receive Mode for your setup.
(See Choose the correct Receive Mode on page 24.) Check for a dial tone. If
possible, call your machine to hear whether it answers. If there is still no answer,
check that the telephone line cord is plugged into the telephone wall jack and the
LINE jack inside the machine. If there is no ringing when you call your machine,
ask your telephone company to check the line.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother mfc-t800 and is the answer not in the manual?

Brother mfc-t800 Specifications

General IconGeneral
BrandBrother
Modelmfc-t800
CategoryAll in One Printer
LanguageEnglish

Related product manuals