Brother mfc-t800 - Changing SCAN Mode Settings via ControlCenter4

Chapter 8
42
Copy options 8
When you want to quickly change the copy
settings temporarily for the next copy, use the
Opciones de Copia (Copy Options) key.
The machine returns to its default settings
one minute after it finishes copying, or if the
mode timer returns the machine to FAX
mode.
(See Advanced User’s Guide: Mode Timer
(MFC model only).)
(Basic User’s Guide)
For information about changing the following
copy settings, see page 42.
 Paper Type
 Paper Size
(Advanced User’s Guide)
For information about changing the following
copy settings, see Advanced User’s Guide:
Copy options.
 Quality
 Enlarge/Reduce
 Layout(2in1 ID)
 2in1(ID)
 Stack/Sort
 Density
 Remove Bkg. Clr
NOTE
If you want to sort copies, we recommend
using the ADF.
Paper Type 8
To get the best print quality if you are copying
on special paper, set the machine for the type
of paper you are using.
a Load your document.
b Press (COPIA (COPY)).
c Enter the number of copies you want.
d Press Opciones de Copia
(Copy Options) and a or b to choose
Paper Type.
Press OK.
e Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71 or
Other Glossy.
Press OK.
f If you do not want to change any other
settings, press
Inicio Negro (Black Start) or
Inicio Color (Color Start).