Brother mfc-t800 User Manual

100
Network menu C
Level1 Level2 Level3 Options Descriptions Page
5.Network 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs.
See .
2.IP Addr ess [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Node Name
BRWXXXXXXXXXXXX Lets you check the Node
name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address
of the primary or
secondary WINS server.
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address
of the primary or
secondary DNS server.
9.APIPA On*
Off
Automatically allocates
the IP address from the
link-local address range.
2.WLAN Assistant — — You can configure your
wireless network settings
using the Brother
CD-ROM.
3.Setup Wizard — — You can manually
configure your print
server for a wireless
network.
See Software and Network User’s Guide.
The factory settings are shown in Bold with an asterisk.

Brother mfc-t800 Specifications

General

Brand	Brother
Model	mfc-t800
Category	All in One Printer
Language	English