What to do if my Brother mfc-t800 All in One Printer says 'Paper Jam'?
If your Brother All in One Printer displays a 'Paper Jam' error, it means paper is stuck inside the machine. Remove the jammed paper following the steps in 'Printer jam or paper jam on page 71'.
Why does my Brother mfc-t800 only print in B&W and says 'Refill [XX] Ink'?
If your Brother All in One Printer prints in B&W only and displays a 'Refill [XX] Ink' message, it means the ink level in one or more of the ink tanks (except black) is low. Refill the ink tank up to the upper line, or fill with all of the ink in the bottle if it doesn't exceed the upper line.
What to do if my Brother mfc-t800 All in One Printer says 'No Paper Fed'?
If your Brother All in One Printer shows a 'No Paper Fed' error, it means the printer is either out of paper or the paper isn't loaded correctly. Refill the paper tray, and then press the Black Start or Color Start button.
What to do if my Brother All in One Printer says 'Out of Memory'?
If your Brother All in One Printer displays 'Out of Memory', the machine's memory is full. If you're sending a fax or copying, press Stop/Exit and wait for other operations to finish before trying again.
How to fix 'Cannot Print Refill [XX] Ink' error on Brother All in One Printer?
If your Brother All in One Printer says 'Cannot Print Refill [XX] Ink', it means the ink level in one or more of the ink tanks is low. Refill the ink tank up to the upper line, or fill with all of the ink in the bottle if it doesn't exceed the upper line.
Why does my Brother mfc-t800 All in One Printer say 'Wrong Paper Size'?
If your Brother All in One Printer shows 'Wrong Paper Size', it means the paper size setting doesn't match the paper in the tray. Check that the Paper Size you choose on the LCD matches the size of the paper in the tray.
What to do if my Brother All in One Printer says 'Cover is Open'?
If your Brother All in One Printer displays 'Cover is Open', the scanner cover is not closed correctly. Lift the scanner cover and close it again.
What does 'Ink Low XXXXXXX' mean on my Brother mfc-t800?
If your Brother All in One Printer displays 'Ink Low XXXXXXX', it means the ink level in one or more ink tanks is low. Look through the window of the ink tank to confirm the actual amount of remaining ink.
How to fix 'Close Ink Cover' error on Brother mfc-t800 All in One Printer?
If your Brother All in One Printer displays 'Close Ink Cover', the ink tank cover is not locked. Firmly close the ink tank cover until it locks into place.
What does 'Data Remaining' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Data Remaining', print data is left in the machine's memory. Press Stop/Exit to cancel the job and clear it from the memory.
General| Printer Type | Inkjet |
|---|---|
| Functions | Print, Scan, Copy, Fax |
| Print Resolution | 1200 x 6000 dpi |
| Print Speed (Color) | 10 ppm |
| Scanner Type | Flatbed |
| Scan Resolution | 1200 x 2400 dpi |
| Connectivity | USB |
Guides on loading single size/type of paper and using the paper tray.
Set the paper size for copies and incoming faxes.
Instructions for loading documents into the Automatic Document Feeder.
Load document, press FAX, set options, enter number, and start.
Select mode based on Voice Mail, TAD, dedicated fax line, or shared line.
Steps to connect the external TAD, including line cord routing.
Steps to connect an external telephone to the EXT. jack.
Steps for manual dialing, speed dialing, and searching address book.
Steps to store up to 40 two-digit Speed Dial numbers with names.
Load document, press COPY, set copies, and start.
Set paper type for best print quality when copying.
Install driver, select machine, choose settings, and click Print.
Install scanner drivers and configure network settings.
Steps to scan to PDF using ControlCenter4 software.
How to refill ink tanks, checking levels, and ink bottle handling.
Instructions for cleaning scanner glass and ADF unit with a lint-free cloth.
How to manually clean the print head for print quality issues.
Checking color blocks, asking if quality is OK, and starting cleaning.
Adjusting print alignment for blurred text or faded images.
Initial checks for power, protective parts, paper, cables, and LCD messages.
Troubleshooting tips for scanning issues.
Troubleshooting tips for software and network issues.
How to remove paper jammed in the top of the ADF.
How to use stiff paper to push out small paper scraps from the ADF.
Steps to locate and remove jammed paper from the machine.
Troubleshooting for condensed print, streaks, missing lines, and margin issues.
Troubleshooting for no dial tone and machine not answering calls.
Troubleshooting for external TAD setup and fax reception interference.
Troubleshooting for unable to send faxes and poor send quality.
Troubleshooting for blank sent faxes and vertical lines.
Troubleshooting for vertical lines, spots, blank copies, and ADF issues.
Troubleshooting for TWAIN/WIA errors, OCR issues, and poor scanning results.
Troubleshooting for software installation issues and 'Device Busy' errors.
To Next Page