Chapter 2
10
When you are using Legal size paper,
press and hold the universal guide release
button (1) as you slide out the front of the
paper tray.
d Fan the stack of paper well to avoid
paper jams and misfeeds.
Always make sure that the paper is not
curled or wrinkled.
e Gently put the paper into the paper tray
printing surface face down and top edge
in first.
Check that the paper is flat in the tray.
Be careful not to push the paper in too far;
it may lift at the back of the tray and cause
paper feed problems.
If you want to add paper before the tray is
empty, remove the paper from the tray
and combine it with the paper you are
adding. Always fan the stack of paper well
before loading it in the tray. If you add
paper without fanning the stack, the
machine may feed multiple pages.
1
To Next Page
Loading...
Need help?
General
