Brother mfc-t800 - Setting the Date and Time

58
NOTE
Setting the date and
time
A
The LCD displays the date and time. If it is not
current, follow these instructions to re-enter it.
You can add the date and time to each fax
you send by setting your Station ID.
a Press Menú (Menu), 0, 1, 1.
b Enter the last two digits of the year using
the dial pad, and then press OK.
c Enter the two digits for the month using
the dial pad, and then press OK.
d Enter the two digits for the day using the
dial pad, and then press OK.
e Press a or b to choose 12h Clock or
24h Clock, and then press OK.
f To enter the time, do one of the
following:
 If you chose 12h Clock in step e,
enter the time (in 12-hour format)
using the dial pad, and then press
OK.
Press a or b to choose AM or PM, and
then press OK.
 If you chose 24h Clock in step e,
enter the time (in 24-hour format)
using the dial pad, and then press
OK.
(For example, enter 19:45 for 7:45
PM.)
g Press Detener/Salir (Stop/Exit).
i
When the print
alignment is not
adjusted properly,
text looks blurry
like this.
After the print
alignment is
adjusted properly,
text looks like this.