1
2
3
4
5
6
7
8
9
61
z TROUBLESHOOTING
Error Messages
The length of the label to be printed using the text entered is
longer than 1 m. Edit the text so that the length of the label is
less than 1 m.
An 18 mm tape cassette is not installed when an Auto-Format
for 18 mm tape is selected. Install an 18 mm tape cassette.
A 12 mm tape cassette is not installed when an Auto-Format
for 12 mm tape is selected. Install a 12 mm tape cassette.
A 9 mm tape cassette is not installed when an Auto-Format
for 9 mm tape is selected. Install a 9 mm tape cassette.
A 6 mm tape cassette is not installed when an Auto-Format
for 6 mm tape is selected. Install a 6 mm tape cassette.
The maximum number of characters for the selected layout
have already been entered. Edit the text to use fewer
characters or use a different layout.
The value entered for the tape length is invalid. Enter a valid
value for the tape length.
The tape length set using the "Fixed" tape length setting is
shorter than the total length of the left and right margins
applied for the "Margin L" cutting option. Select a different
cutting option.
The length of the label to be printed using the text entered is
longer than the length setting. Edit the text to fit within the set
length or change the length setting.
There are no files stored in the internal memory when you try
to open or delete a file. Save a label file first.
There is not enough internal memory available when you try
to save a label file. Delete any unnecessary files to make
more memory available for the new label file.
Message Cause/Remedy
To Next Page
Loading...
Need help?
General
