73
Hem-stitching 2
2. Pull out several threads from both sides of the 4 mm (5/32")
part which is not yet frayed.
[Pull out four threads, leave five threads and then pull out four
threads, the width of five threads is approximately 4mm
(5/32") or less.]
1 Approx. 4.0 mm (5/32") or less.
2 Four threads (Pull out)
3 Five threads (Leave)
3. Sew the decorative stitch on the center of the five threads
created above.
* Wing needle is an option.
4. Illustration of finished product.
5. Illustration of finished product.
1
1. In decorative stitch mode, enter “48” to select the stitch for
hem-stitching.
To Next Page
Loading...
