Brother PR1055X - Making Embroidery Adjustments; Adjusting the Tension of the Bobbin Thread

116
Adjusting the tension of the bobbin thread
a
Tie the included weight to the end of the thread
extending from the bobbin case.
Prewound bobbins
1 Weight (L)
Finish detecting positioning stickers (2 locations).

Begin embroidering the second pattern.

Finish embroidering the second pattern.
MAKING EMBROIDERY
ADJUSTMENTS
Note
• Be sure to check the tension of the bobbin thread
each time that the bobbin is changed.
Depending on the bobbin thread type and whether
a prewound bobbin is used, the tension of the
bobbin thread may differ. For example, when
replacing an empty prewound bobbin with one of
the same type, be sure to check the tension of the
bobbin thread and adjust the tension if necessary.
• Be sure to adjust the tension of the bobbin thread
before adjusting the tension of the upper thread.
Note
• Different weights are used to adjust prewound
bobbins and metal bobbins.
Metal bobbins:
1 Weight (L)
2 Weight (S) (included with the optional bobbin
winder)
a