Brother PR1055X - Aligning the Embroidery Patterns; Designing Repeated Patterns

BASIC EMBROIDERY
49
2
Aligning the embroidery patterns
a
Select patterns that you want to align. (page 42)
b
Touch , and then select the key for the desired
alignment.
Example
Designing repeated patterns
Using the border function, you can create an arrangement
using repeated patterns.
a
Touch .
b
Select the direction in which the pattern will be
repeated.
1 Horizontal direction
2 Vertical direction
 The pattern direction indicator will change
depending on the direction selected.
c
Use to repeat the pattern on the left and to
repeat the pattern on the right.
• To delete the left pattern, touch .
• To delete the right pattern, touch .
d
Adjust the spacing of the repeated pattern.
• To widen spacing, touch .
Memo
• You can select desired multiple patterns by directly
touching each pattern on this screen.
• Touch to reset the alignment.
2
1