Brother PR1055X - USING THE MEMORY FUNCTION

128
■ Embroidering aligned characters
Follow the procedure described below to embroider
aligned characters in a single row when the pattern
extends beyond the embroidery frame.
Example: Aligning “DEF” to the characters “ABC”
a
Select the character patterns for “ABC”.
b
Touch in the embroidering settings screen.
c
Select .
d
Touch .
 The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
e
Touch to return to the embroidering settings
screen, and then touch
to continue to the
embroidering screen.
 changes to while the starting point is set
in the lower-left corner of the pattern.
f
Touch , and then press the “Start/Stop”
button to begin embroidering.
g
After the characters are embroidered, cut the threads,
remove the embroidery frame, and then attach the
embroidery frame again so that the remaining
characters (“DEF”) can be embroidered.
1 End of the embroidering
h
As in step a, select the character patterns for “DEF”.
i
In the embroidering settings screen, touch .
j
Touch .
 The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
k
Touch .
Note
• To cancel the starting point setting and return the
starting point to the center of the pattern, touch
.
• Use to select a different starting point for
embroidering.