To Next Page

To Previous Page

5-40 Embroidery

1 —

2 —

3 —

4 —

5 —

6 —

7 —

8 —

9 —

CONTENTS

Index

MAKING EMBROIDERY ADJUSTMENTS

Adjusting Thread Tension

When embroidering, the thread tension should be set so that the upper thread can slightly be seen

on the wrong side of the fabric.

■ Correct Thread Tension

The pattern can be seen from the wrong side of the fabric.

If the thread tension is not set correctly, the pattern will not finish well. The fabric may pucker or

the thread may break.

(right side) (wrong side)

Follow the operations described below to complete the revisions, according to the situation.

CAUTION

If the thread tension setting is made extremely weak, the machine may stop during sewing.

This is not the sign of a malfunction. Increase the thread tension slightly, and begin sewing

again.

Note

• If you turn off the power or select a different pattern, the thread tension will reset to the auto-

matic setting.

• When you retrieve a saved pattern, the thread tension setting will be the same as when the

pattern was saved.

■ If the Upper Thread Tension is Too Strong

The bobbin thread will show on the right side of the

fabric.

(right side) (wrong side)

Press to weaken the upper thread tension.

Brother ULT-2003D User Manual

Other manuals for Brother ULT-2003D