Brother ULT-2003D - Embroidering Small Fabrics or Fabric Edges

5-64 Embroidery
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
1
2
1
2
1
2
Embroidering Small Fabrics or Fabric Edges
Use an embroidery stabilizer material to provide extra support. After embroidering, remove the
stabilizer fabric carefully. Attach the stabilizer as shown in the examples below. We recommend
using a stabilizer material for embroidery.
Embroidering Small Fabrics
1 Fabric
Use a temporary spray adhesive to adhere the small
piece of fabric to the larger piece in the frame.
If you do not wish to use a temporary spray adhesive,
attach the stabilizer fabric with a basting stitch.
2 Stabilizer
Embroidering Edges or Corners
1 Fabric
Use a temporary spray adhesive to adhere the small
piece of fabric to the larger piece in the frame.
If you do not wish to use a temporary spray adhesive,
attach the stabilizer fabric with a basting stitch.
2 Stabilizer
Embroidering Ribbons or Tape
1 Ribbon
Secure with double-sided tape or a temporary spray
adhesive.
2 Stabilizer