This setting will take still pictures of
game in daytime and nightime. This is
the setting most people use for trails
and feeding areas.
This setting allows you to take
timelapse images during the day. In
addition, your camera will also take
motion activated pictures during the
day and night, to make sure you do
not miss any game activity.
This setting will take HD video clips of
game in daytime and nightime.
12
Temperature Units
Info Strip
SD Card Management
Your temperature units can be displayed on the
picture’s info bar in Fahrenheit or Celsius. To change
the selection, Press the RIGHT ARROW key to make
your selection.
Your trail camera has an information bar that is
printed at the bottom of each photo taken. This info
strip shows the following information: time, date,
moonphase, temperature, camera ID, and Barometric
pressure. This option can be turned on or off, using
the RIGHT or LEFT ARROW buttons.
By turning the SD Card Management feature ON, the
camera will erase the oldest pictures or videos on the
SD card when the SD card becomes full. This allows
your camera to continue taking pictures if you cannot
get to the field to swap out a full SD card. If the SD
Card Management feature is turned off, when your SD
card fills up, the camera will not record any additional
pictures or videos when triggered until you change out
the SD card or delete the images.
To Next Page
Loading...
