This is the default setting. Your camera
will only take 1 picture when triggered.
The selections available are 2-8 shots in
this mode. If you select 4-SHOT
STANDARD, your camera will take 4
pictures, spaced 2 seconds apart.
This selection allows rapid image
capture. When triggered, your camera
will take 2-8 RAPID FIRE shots,with only
0.3 seconds between pictures. Your
available options are 2,3,4,5,6,7, or 8
RAPID FIRE shots.
14
Delete All
Software Upgrade
Default Settings
The following options can be changed by
pressing the OK button to highlight the option,
and changing the selection using the RIGHT or
LEFT arrows. Remember to press the OK button to
save your selection. Press the DOWN button to
move to each new option to set below.
This selection returns your camera back to the
factory default selections for each setting.
By selecting DELETE ALL, all of the images on
your SD card are erased. This function also
reformats your SD card. It is a good idea to use
the DELETE ALL function and reformat your SD
card each time you install it in the camera for
use.
The software upgrade function allows you to
upgrade your software. If a software upgrade is
available for your camera, it will be posted on
our website, along with detailed instructions for
upgrading at:
www.browningtrailcameras.com/customer-service
To Next Page
Loading...
