MAINTENANCE PROCEDURES
NOTICE
Plastic retaining pins
may break if taillight assembly is
forced sideways. Avoid sideways
movement when pulling taillight
out.
NOTICE
Do not pull taillight hous-
ing out too far to avoid damaging
wiring.
2. R emove lamp socket from taillight
assembly.
2.1 Turn socket counterclock-
wise.
2.2 Pull socket out.
3. Replace bulb.
4. Secure sock et into taillight assem-
bly.
5. Push taillight assembly back into
place.
NOTE: Led taillight: leds cannot be re-
placed.
If led taillight is failed change taillight
assembly. Fasten new taillight by
screws.
100
______________
To Next Page
Loading...
