EasyManua.ls Logo

BRUEL & KJAER 2237 - Transferring Records to a Computer

BRUEL & KJAER 2237
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BB106411.book : 2237-ch4 Black 14
Chapter 4 Data Operations
Transferring Records to a Computer
4–14
Brüel & Kjær2237 Controller
User Manual
4.3 Transferring Records to a
Computer
The 2237 Controller is capable of saving up to 40 records of
measured results. For more information about saving records,
refer to section 4.1. All records can be downloaded to a com-
puter in a standard spreadsheet format. This enables you to
read, print, and present your test results in any standard
spreadsheet program (such as Microsoft™ Excel).
4.3.1 Connecting to a Computer
1. Take a set of measurements and save each to a record.
See section 3.2 and section 4.1 for instructions.
2. Switch off the sound level meter and bring it to your
computer.
3. Switch off your computer.
4. Connect one end of a Brüel & Kjær adaptor cable AO1386
to the serial port on the back of the sound level meter.
5. Tighten the cable’s connector screws to the screw holes
on the sound level meter.
Fig.4.15 Location of the serial port
960159e
Serial Interface
Serial Port

Other manuals for BRUEL & KJAER 2237

Related product manuals