BB106411.book : 2237-ch7 Black 8
Chapter 7 – Quick Reference
Data Functions Flow Chart
7–8
Brüel & Kjær2237 Controller
User Manual
7.5 Data Functions Flow Chart
The button gives you access to the sound level meter’s
data functions. These are used to store, print, download, and/
or erase records of sound measurements.You are only able to
do this while the instrument is not measuring. Press to
step through the available settings, as detailed in the flow-
chart below. See section 3.4.4, section 4.2 and section 4.3 for
more information.
Note:
The flow chart shown in Fig. 7.7 shows all possible choices.
The following exceptions apply:
● If the buffer is empty (elapsed measurement time = 0),
then the Store Results window will not appear.
● If there are no stored records, then none of the recall,
output, or erase windows will appear.
● If there are no stored records and the buffer is empty,
then the following warning message will appear when
you press .
Fig.7.6 The no data available warning
*** WARNING ****
No Data
Available
To Next Page
Loading...
