Bruker AQS - Introduction Status of the AQX CU09 CCU; Modifications of the Introduced Layout; Jumper Configuration; Configurations of the Introduced Layout

 %
  
  
 %

 &"  #"! !$! #

Fast Ethernet (fe) on
AQX CCU/9 with
Status
Date
Serial#
Ethernet Address
AQX CCU/9 with
R4700
Status
Date
/Name
Bruker OUI Device Group
Prototypes  
0000ad 0000 09
Series Production 
09
10Base2 Ethernet (la)
on AQS CCU/10 with
Status
Date
Serial#
Ethernet Address
on AQS CCU/10 with
R4700
Status
Date
/Name
Bruker OUI Device Group
Series Production  
0000ad 0000 06
Fast Ethernet (fe) on
AQS CCU/10 with
Status
Date
Serial#
Ethernet Address
AQS CCU/10 with
R4700
Status
Date
/Name
Bruker OUI Device Group
Series Production  
0000ad 0000 09
3. 7. Introduction Status of the AQX CU09 CCU
3. 7. 1. Modifications of the introduced layout
There are 25 prototypes of CU09 using layout H3P2160C with some modifications.
The PCB layout put into production is H3P2160D without any modification.
3. 7. 2. Jumper Configuration
Normal setting of installed jumpers:
W4 A+B (16 Mbyte DRAM with 2 8Mbyte SIMM’s)
W1 not set
W12 C
W6 not set
W10 set
W11 not set
W3 set
W2 set in pos. B
W7 set in pos. B and C
W8, W9 nothing to set, test signals
3. 7. 3. Configurations of the introduced layout
CCU configuration of Serial Interfaces:
CU09
UNIX
Special File
 !
 
!
 
!
 !  !  !  !
Function   
CCU
Connector
     
AQX Ext. U.
Connector





   