Emergency Heat
Emergency heat is staged electric heating included with many heat
pump systems. Emergency heat is activated either when the heat
pump has malfunctioned and heating is required, or when the
homeowner manually activates emergency heat. Emergency heat is
manually activated by pressing the red HEAT button for four
seconds. To activate Emergency Heat, press the red HEAT button
for four seconds. If your system is a heat pump with electric heat,
then the display will show the three choices:
SYSTEM IN CONTROL (the system will choose the type and
amount of heat needed for conditions)
HEAT PUMP ONLY (only the heat pump will be used for heating)
ELECTRIC HEAT ONLY (only electric heat will be used for
heating)
If your system is a HYBRID HEAT™ Dual Fuel System (heat
pump with gas or oil furnace), then the display will show the
three choices:
HYBRID HEAT™ (the system will choose the type and amount
of heat needed for conditions)
FURNACE ONLY (only the furnace will be used for heating)
HEAT PUMP ONLY (only the heat pump will be used for heating)
Scroll the highlight to your choice using the scroll button under the
door, then press the left side button to save your selection and exit.
To deactivate Emergency Heat, press the red HEAT button for four
seconds and choose SYSTEM IN CONTROL or HYBRID HEAT,
depending on your type of heating equipment.
NORMAL OPERATION 8
To Next Page
Loading...
Need help?
General
