ADVANCED SETUP 29
Vacation Settings
You can pre-select temperature, humidity and fan settings for
your VACATION function. These settings will take effect when
you activate VACATION operation as outlined in the NORMAL
OPERATION section of this manual, pages 7 - 15.
1 Open the door of the Evolution
®
Control.
2 Press the ADVANCED setup button.
3 Press the RIGHT button four times to select the VACATION
screen (5 of 5)..
4 Use the LEFT button to select the highest temperature the
system will allow during VACATION operation.
5 Press down on the SCROLL button to select MIN TEMPERA-
TURE.
6 Use the LEFT button to select the lowest temperature the
system will allow during VACATION operation.
7 Press down on the SCROLL button to select MAX HUMIDITY.
8 Use the LEFT button to select the highest humidity the system
will allow during VACATION operation.
9 Press down on the SCROLL button to select MIN HUMIDITY.
10 Use the LEFT button to select the lowest humidity the system
will allow during VACATION operation.
11 Press down on the SCROLL button to select FAN.
12 Use the LEFT button to select AUTO, LOW, MED or HIGH fan
operation.
13 To exit, press ADVANCED or simply close the door.
NOTE: You can exit at any time. When exiting, you will be
prompted to save changes if you have made any. Select “YES”
to save your changes, “NO” to revert back to previous settings.
To Next Page
Loading...
Need help?
General
