NORMAL OPERATION 11
Hold Current Temperature
Press the HOLD button to override the program and maintain the
current indoor temperature set point(s) indefinitely.
To revert back to your programmed comfort schedule, press the HOLD
button again.
NOTE: HOLD is not available if programming has been turned off.
Vacation Function & Settings
VACATION operation conserves energy while
you are away and ensures a comfortable home
upon your return.
1 Openn the door of the Evolution
®
Control.
2 Press the VACATION button.
3 Use the Right Up/Down button to select the desired
temperature for VACATION operation.
4
Use the Left Up/Down button to select the number of days for
VACATION operation as seen in lower left corner of screen.
5 Press the VACATION button to start VACATION operation.
6 You will be prompted to start VACATION operation. Press the
RIGHT button for YES or press the LEFT button for NO.
Note: You have up to 15 minutes to make changes to the
temperature or duration after VACATION has been activated.
Any changes made after the 15 minute period will be treated
as a temporary override to vacation settings.
7 The system will automatically revert back to its normal opera-
tion after the selected number of VACATION days has expired.
- OR -
To Next Page
Loading...
Need help?
General
