WHAT IF…
OUT Indicator is displayed…
The OUT indicator reminds you that your
system is in vacation mode. This function
automatically adjusts the temperature and
humidity settings to levels appropriate for
when you’re away. Press the VACATION
button to resume normal system operation.
NOTE: This indicator does not reflect a problem
with your system.
EQUIPMENT ON Indicator is displayed…
When the cooling equipment is operating, the
word COOL preceded by a small
triangle is displayed below the cooling set
point. When the heating equipment is
operating, the word HEAT preceded by a small
triangle is displayed below the heating set
point. If the equipment turn on is being
delayed, the triangle and the word will flash.
NOTE: This indicator does not reflect a problem
with your system.
You have a power outage…
An internal power source eliminates the
need to reprogram the Thermidistat
Control after power outages. The comfort
schedule you have entered will be
maintained indefinitely. Clock will run for
8 hours.
28
To Next Page
Loading...
