BST CLS Pro 600 Quick Reference Guide

Quick Reference Guide QRG
2.2.4.2 Adjust stroke limitation
and servo-center position
The actuator stroke limitation (adjustment of the software limit
switches) and the adjustment of the servo-center position are
carried out using a special setup menu.
The settings are sub-divided into the following steps:
Step 1: Activating the setup menu
1. Press key MAN.
The controller changes to manual operating mode.
The LED of the key lights.
2. Press key SETUP.
The controller changes to setup mode.
The setup selection menu appears in the display.
3. Select the setup menu symbol for actuators EMS 17, EMS 21
and EMS 22 using the arrow keys.
4. Press key ENTER.
The setup menu is active.
The LED of the key SETUP lights.
The significances of the individual display symbols are:
or
Setup menu
EMS 17 / 21 / 22
32
8
7
6
5
4
1
Quick Reference Guide EDV no.: MD.341.01.01
ekr 500 Plus with CLS Pro 600 Issue Date: 31.03.2009 Page: 8/18

BST CLS Pro 600 Specifications

General

Brand	BST
Model	CLS Pro 600
Category	Accessories
Language	English