About This Document
1
ekr 500 digital Unit Touch – Master-Slave Guiding with Sensor Positioner 5/45
1 About This Document
1.1 What You Need to Know
These instructions describe the special function Master-Slave Guid-
ing with Sensor Positioner of the ekr 500 digital Unit Touch web
guiding controller. They are a supplement to the operating manual
for the ekr 500 digital Unit Touch controller (document number
MD.492).
These instructions must only be used in conjunction with
the operating manual for the ekr 500 digital Unit Touch
web guiding controller. Every user must be familiar with
the operating manual for the controller and observe the
safety instructions contained therein.
These supplementary instructions only include information for the
Master-Save Guiding with Sensor Positioner that are not already
listed in the operating manual for the controller.
The following instructions must be observed in order to avoid haz-
ards and incorrect operation:
■ Every user must have read these instructions in full before
working with or on the system.
■ Every user must follow the safety information in these instruc-
tions and in the operating manual for the ekr 500 digital Unit
Touch web guiding controller.
1.2 Target Group
These instructions are directed to all persons that work with or on
the system. The operating company of the entire system and
supervising personnel must also be familiar with these instructions.
1.3 Storage and Distribution
These instructions must be stored at the workplace in such a man-
ner that the user has access to them at all times.
These instructions and all other applicable documents are a com-
ponent of the product and must be handed over to the operating
company of the system.
To Next Page
Loading...
Need help?
General
