BSV BSPOOL EVOTOUCH Series - Chemical balance of the water

Manual EVOTOUCH v.5 61 / 104
2.2 Chemical balance of the water
The effectiveness of chlorination and the quality of water for healthy bathing,
depends largely on the pH of the water. Therefore, it should be checked
regularly and adjusted as necessary.
There are other parameters which should be considered for the correct
operation of the salt water chlorinator. We recommend an in-depth analysis of
the water when installing a salt water chlorinator.
Parameter
Minimum
Value
Maximum
Value
PH
7.0
7.8
FREE CHLORINE (mg/l)
0.5
2.5
COMBINED CHLORINE (mg/l)
--
0.6
TOTAL BROMIDE (mg/l)
3.0
6.0
BIGUANIDE (mg/l)
25
50
ISOCYANURIC ACID (mg/l)
--
<75
OZONE (GLASS) (mg/l)
--
0
OZONE (before)
0.4
--
TURBIDITY (NTU)
--
<1
OXIDES (mg/l)
--
<3
NITRATES (mg/l)
--
<20
AMMONIA (mg/l)
--
<0.3
IRON (mg/l)
--
<0.3
COPPER (mg/l)
--
<1.5
ALKALINITY (mg/l)
100
160
CONDUCTIVITY (us/cm)
--
<1700
TDS (mg/l)
--
<1000
HARDNESS (mg/l)
150
250