Manual EVOTOUCH v.5 68 / 104
3.2.4.2 Technical specification
Free chlorine, low pH dependency: Max isocyanuric acid
500mg/L
Membrane. Potentiostatic 3-electrode header
Embedded in the probe. 4-20mA output
Maximun Operation pressure
0.5 bar. Water hammer effect must be avoided.
Directly on BSV control panel
Maximum time without CL on water
Water test: Minimum once a week
Header-membrane change: Once a year
Electrolyte change: Every 3-6 months, depending on the
quality of the water
3.2.4.3 Installation
Please, carefully follow the recommendations regarding probe installation to
ensure its proper operation:
To Next Page
Loading...