Manual EVOTOUCH v.5 93 / 104
The equipment includes an automatic cleaning system, based on reversing
polarity in the electrolysis cell. These cleaning cycles are performed regularly.
The time between cleaning (in hours) can be adjusted depending on the water
hardness of your swimming pool.
It is possible to select cleaning intervals from 1 to 8 hours.
4.1.4.4- Clock
The equipment has a time clock, which will be taken as the reference when
programming times of the auxiliary relays. If the equipment is switched OFF,
clock will keep on time.
4.1.4.5 Flow switch
The flow sensor detects whether or not there is water flow in the piping. If it
detects that there is no flow, the production will stop, and an alarm will sound
accompanied by a red warning LED. Once the flow has been reestablished, the
equipment will return to normal operation.
The "Flow Kit" (optional) is necessary to activate the flow sensor, which is
done by pressing Flow Switch = ON.
4.1.4.6- Cover
To Next Page
Loading...