Using the phone
16
Receive a call
When you receive a call, the phone
rings and the display shows CALL
and
. If you’ve got a caller display
service, the display shows the caller’s
number if it’s available or the caller’s
name if it matches an entry stored in
your contacts list.
1. Lift the handset from the base
or charger to accept the call. If the
handset isn’t on the base or charger,
you’ll need to press green
.
Call Waiting
If you’ve got a call waiting service
and it is switched on, your phone
will alert you to a second incoming
call if you’re already engaged on an
external call.
1. You’ll hear the call waiting tone
and if you also
have caller display the display will
show the number of the caller, or
the name if it matches an entry in
your contacts.
2. Press
to answer the new call.
3. Press
to toggle between the
two callers.
4. Press
to hang up the
current call.
Auto answer
By default, auto answer is set
to On, so you can answer a
call just by lifting the handset
you’ll need to lift the handset
too.
Out of range warning
When the handset is out of
range of the base, the display
will show OUT OF RANGE,
you will hear a warning tone.
You need to move back within
range of the base station.
If you move out of range
when you’re on a call, you’ll
lose your connection. The
handset will automatically re-
connect to the base when you
move back within range.
To Next Page
Loading...
Need help?
General
