Answer Machine
30
Time saver
When you ring in to access
your answer machine
remotely, if you have set Time
saver as the answer delay
and you have new messages
it will answer after 4 rings. If
you don’t have new messages
it will answer after 6 rings.
This means you can hang up
knowing that you have no
new messages, saving you the
time and the cost of the call.
For compatibility with
BT 1571 (or another
voicemail service)
Make sure the answer
delay is set for your answer
machine to answer before
the voicemail service. For BT
1571 do not set the answer
delay to more than 5 rings.
Set the answer mode (Answer &
Record or Answer Only)
1. Follow steps 1 to 2 in ‘Record
your own outgoing message’ on
page 29.
2. ANSWER MODE is displayed,
press
.
3. Press
or to display the
outgoing message mode you
ANS & REC or ANSWER
ONLY and press
. You will hear a
Set the answer delay
The answer delay setting sets how
many times the phone will ring
before the answer machine takes the
call. You can choose from 2-8 rings
or Time saver. The default setting is
4 rings.
1. Press
, ANS. MACHINE is
displayed, press
.
2. Press
until TAM SETTINGS is
displayed, press
.
3. Press
to display ANSWER
DELAY and press
.
4. Press
or
to display the
number of rings you want (2–8 rings
or Time saver) and press
to save
your new setting.
To Next Page
Loading...
