BT BT3880 - Turn the Handset Tones on or off; Change the Handset Name

Settings
38
Turn the handset tones on or o
1. Press
, scroll to HS
SETTINGS and press
.
2. ALARM is displayed. Press
until TONE SETUP is displayed and
press
.
3. KEY TONE is displayed, press
or press to display BATTERY
TONE or OUT OF RANGE TONE and
then press
.
4. Press
or
to select ON or OFF
then press
to save, you will hear a

Change the handset name
1. Press
, scroll to HS
SETTINGS and press
.
2. ALARM is displayed, press
until RENAME HS is displayed and
press
.
3. Edit the name by selecting C to
delete the characters, then enter the
new name and press
to save. You


keypad tones, battery tones
and out of range tones. You

default setting is On.
With keypad tones turned
on, you will hear a beep after
each button press.
To alert you that the battery
needs charging, you will hear
a low battery tone while you
are on a call.
You will also hear a warning
tone if the phone goes out
of range.
A handset name can be a
maximum of 10 characters.