BT Call Guardian
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
22
How do I change the different BT Call Guardian modes?
Your BT4600 has two Call Guardian settings, Announce and Answer phone.
To change to Announce or Answer phone:
1. In idle mode, press .
2. BT Call Guardian menu is shown. Press OK.
3. Scroll to Guardian Mode, press OK and then select the mode you want to use and
press OK.
Switch BT Call Guardian on/off
When Call Guardian is set to On, it is On for whichever mode you’re using (e.g.
Announce mode). If you turn Call Guardian Off, all calls will be allowed through,
even if they are already on your blocked list.
1. In idle mode, press .
2. BT Call Guardian menu is shown. Press OK.
3. On/Off is displayed. Press OK, then press or to select either On or Off and
press OK.
When you receive a call with Call Guardian switched on you will hear the
message, ‘You have a call from xxxx. To accept the call press 1. To always accept
their call, press 2. To block their call, press 3. To send the call to answer phone,
press 4. To hear these options again, press
*
’.
To Next Page
Loading...
Need help?
General
