Using the phone
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
38
If you get an incoming call
while you’re paging a handset,
the incoming call takes priority
and paging will stop.
If the handset ringer is switched
off on a handset, it will be
temporarily switched back on so
the handset can be found.
Paging calls can’t be answered
by a handset.
To lock the keypad
1. Press and hold for 2 seconds. The handset gives
a confirmation tone and Keypad locked is briefly
displayed before returning to the idle screen with
the
icon displayed.
To unlock the keypad
1. Press and hold for 2 seconds. The handset gives
a confirmation tone and Keypad Unlockd is briefly
displayed before returning to idle.
Turn the handset ringer on or off
1. Press and hold for 2 seconds to turn the
handset ringer on or off. The display will briefly
show Ringer on or off before reverting to the idle
screen with the
icon displayed if the ringer has
been turned off.
Find handset (Paging)
You can ring a handset to help find it.
1. Press on the base. All handsets registered to
the base will ring and the screen will show Here I
am! for up to 2 minutes.
2. To stop the ringing, press on the base again or
select End or press on any handset.
You can lock the keypad so that
it can’t be used accidentally
while you’re carrying it around.
With the keypad locked, you
can still call the emergency
services on 999 and 112 using
preparatory dialling and you
can still answer incoming calls
and operate the in call features
as normal. When the call is
ended, the
comes on again.
To Next Page
Loading...
Need help?
General
