Settings
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
70
If Auto answer is set to On you
can answer a call by lifting the
handset off the base. If it’s set
to Off, you’ll need to lift the
handset off the base and then
press . If Auto end is set to
On you can end a call by placing
the handset back in the base.
If Auto end is set to Off,
you’ll need to press
to
end the call.
With Auto join calls set to
On you can automatically
join an existing call from
another registered handset
without being invited to join
the call, you can simply press
to join.
3. Press or to display either Auto answer, Auto
end call, Auto join calls or First ring and press OK.
4. Press or to display On or Off and press OK to save.
Base settings
Set the base ringtone melody
Choose from 5 base ringtones. The default is Melody 1.
1. Select Menu, scroll to display Settings and press
OK.
2. Press to display Base settings and press OK.
3. Ringing is displayed, press OK.
4. Ringtone is displayed, press OK. Press or to
display and listen to the melodies and press OK
to save your choice.
Set the base ringer volume
There are 5 base ringer volume levels plus Ringer
off. The default is Level 3.
1. Select Menu, scroll to display Settings and press
OK.
2. Press
to display Base settings and press OK.
3. Ringing is displayed, press OK.
4. Press
to display Ringing volume and press OK.
Press
to increase the volume or
to decrease
or turn the ringer off. Press OK to save.
To Next Page
Loading...
Need help?
General
