If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
43
You must enter a name and a
number for the contact to be
stored.
Names can be up to 14
characters and numbers up
to 24 digits.
Entering names
Use the keypad letters to enter
names, e.g. to store Tom: Press
once to enter T. Press
three times to enter o. Press
once to enter m.
Writing tips
To delete the last digit/
character entered, select
Clear.
Press
to switch between text
entry modes: sentence case
(Abc), upper case ABC), lower
case (abc) or numeric (123).
Press
to insert a space.
To enter a pause in a
contact number
When storing a number, press
and hold
in the place where
you want the pause.
To enter a recall in a
contact number
When storing a number, press
and hold
in the place
where you want the recall.
You can store up to 200 entries in your list
of phonebook contacts. Contact entries will
automatically be copied to any other handsets you
have registered to the base. Any change made on
one handset will be updated on all other handsets.
The handset will come with some special numbers
pre-stored. These will include Your BT Product
Helpline, BT 118500, All handsets (if you have
more than two handsets registered) and a list of the
handsets registered to the base according to their
default name/number (e.g. Handset 2 or 3 etc) or
name if you have stored one.
Store a contact
1. From the home screen, press .
2. Select Options. Add new contact is displayed, press
OK.
3. Enter the new contact name using the keypad (see
note opposite for help) then press Next and enter
the number and press Save.
4. Press
or
to choose between VIP Off or On
and select OK.
Phonebook
To Next Page
Loading...
Need help?
General
