If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
39Call control settings
To enter the Call control menu you need to enter your remote access PIN. This will
need to be set the first time you try and enter the menu, simply follow the on
screen instructions. If you have already changed the remote access PIN when
setting your remote access then you will not need to set it again as this PIN is used
for both Call control and Remote access.
Set-up Do not disturb
Do not disturb allows calls to be received silently with minimal notification.
The default is off.
1. In idle mode, press
.
2. Scroll to Do Not Disturb and press OK.
3. Press the or
to select either On or Off and press OK.
When set to On, the idle screen will display DO NOT DISTURB instead of the
handset name. If you have set some Contacts to be VIPs, they will always be
allowed through when Do not Disturb is on.
To Next Page
Loading...
